vrouter-bgp-remove

This command removes Border Gateway Protocol (BGP) from a virtual router (vRouter) service on a fabric, cluster, or standalone switch.

Syntax   vrouter-bgp-remove 

vrouter-name name-string

Specify the name of the vRouter service.

Specify the following BGP arguments:

ip ip-address

Specify the IP address of the route to remove from the vRouter. This is either the neighbor IP address or network IP address.

l3-port l3port-usable-port-name

Specify the Layer 3 port to remove from the vrouter.

Defaults   None.

Access   CLI

History   

Version 1.2.1

Command introduced.

Version 5.1.3

Parameter l3-port added.

Usage   Each fabric, cluster, standalone switch, or virtual network (vNET) can provide its tenants with a vRouter service that forwards traffic between networks, and implements Layer 4 protocols. Use this command to remove BGP to the vRouter service.

Examples  To remove the neighbor BGP route from the vRouter service, BGP-vService, use the following command:

CLI (network-admin@switch) > vrouter-bgp-remove vrouter-name BGP-vService name 209.75.183.3

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south