Netvisor ONE Command Reference A-Z

vrouter-name name-string

Name of the vRouter.

Specify any of the following optional OSPF parameters:

nic vrouter interface nic

Name of the vNIC.

nic-state down|up

The vNIC state.

l3-port l3-port-number

The Layer 3 port numbers.

link-local-ip ip-address

The IPv6 link-local IP address.

ip6 ip-address

The IP address of the interface.

netmask-ip6 netmask

The netmask of the IP address.

area ip-address

The area ID for the interface in IPv4 format.

mtu mtu-number

Displays MTU for the interface.

mtu-mismatch-detection|no-mtu-mismatch-detection

Displays if MTU mismatch detection is configured.

network-type point-to-point|broadcast|loopback

The OSPF network type.

state down|loopback|waiting|point-to-point|dr-other|backup|dr

Displays OSPF interface state.

dr-id ip-address

The designated router ID.

dr-ip ip-address

The designated router IP address.

bdr-id ip-address

The backup designated router ID.

bdr-ip ip-address

The designated router IP address.

priority priority-number

The priority.

cost cost-number

The cost.

hello hello-number(s)

The hello-interval in seconds.

dead dead-number(s)

The dead time in seconds.

retransmit retransmit-number(s)

The retransmit interval time in seconds.

if-scoped-lsa if-scoped-lsa-number

The number of interface LSAs scoped for the area.

ls-update ls-update-number

The number of pending LSAs for LSUpdate.

ls-ack ls-ack-number

The number of pending LSAs for LSAck.

vrf vrouter vrf vrf|default 

Name of the VRF router.

Version 3.0.0

Command introduced.