fabric-anycast-mac-show
This command is used to display the anycast MAC address for the fabric.
Syntax fabric-anycast-mac-show
|
mac mac-address |
The anycast MAC address for the fabric. The default value is 64:0e:94:40:00:02, |
Defaults None
Access Network Administrator
History
|
Version 3.0.0 |
Command introduced. |
Usage Use this command to display the anycast MAC address for Virtual Routing, and Forwarding (VRF).
Examples To display the anycast MAC address, use the following syntax:
CLI (network-admin@switch) > fabric-anycast-mac-show
mac: 64:0e:94:40:00:02