flow-tracker-add-protocol

This command is used to add a non-TCP protocol for analysis.


Syntax   flow-tracker-add-protocol

protocol dns|ntp|dhcp|ping4|udp|ping6|dhcpv6

Specifies to add a protocol for analysis.

Specify any of the following options:


server-port server-port-number

Specifies the server port for UDP.

Defaults   None

Access   CLI

History   

Version 7.0.1

Command introduced.


Usage   Use this command to add a non-TCP protocol for analysis.

Informational Note:  The FlowTracker feature and commands for non-TCP analytics are available on the following platforms in NetVisor version 7.0.1:

  • Dell: S5232F-ON, S5248F-ON        
  • Edgecore: AS7726-32X, AS7326-56X, AS5835-54X, AS5835-54T
  • Freedom: F9432-C, F9480-V, F9460-X, F9460-T


Examples  To add a non-TCP protocol for analysis, use the following command:

CLI (network-admin@switch) > flow-tracker-add-protocol

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south