flow-tracker-remove-protocol
This command is used to remove a non-TCP protocol.
Syntax flow-tracker-remove-protocol
|
protocol dns|ntp|dhcp|ping4|udp|ping6|dhcpv6 |
Specifies to remove a protocol for analysis |
|
Specify any of the following options: |
|
|
server-port server-port-number |
Specifies the server port for UDP. |
Defaults None
Access CLI
History
|
Version 7.0.1 |
Command introduced. |
Usage Use this command to remove a non-TCP protocol.
Informational Note: The FlowTracker feature and commands for non-TCP analytics are available on the following platforms in NetVisor version 7.0.1:
- Dell: S5232F-ON, S5248F-ON
- Edgecore: AS7726-32X, AS7326-56X, AS5835-54X, AS5835-54T
- Freedom: F9432-C, F9480-V, F9460-X, F9460-T
Examples To remove a non-TCP protocol, use the following command:
CLI (network-admin@switch) > flow-tracker-remove-protocol