NetVisor OS Command Reference 7.0.2

igmp-snooping-show

This command displays information about Internet Group Management Protocol (IGMP) snooping on the network.

Informational Note:  NetVisor OS does not support IGMPv1. If you use IGMPv1, you must disable IGMP snooping on the Pluribus Networks switch

Syntax   igmp-snooping-show

Defaults   None

Access   CLI

History   

Usage   IGMP snooping allows the switch to listen in on IGMP traffic between hosts, and routers, thus maintaining a map of the links that need IP multicast streams. Use this command to display IGMP snooping information on the switch.

Examples  To display information about Internet Group Management Protocol (IGMP) snooping, use the following command:

CLI (network-admin@switch) > igmp-snooping-show

switch:                     switch

enable:                     yes

vxlan:                      no

enable-vlans:               1-4092

snoop-linklocal-vlans:      none

query-interval(s):          60

query-max-response-time(s): 1