igmp-switches-show

This command is used to display switches with IGMP protocol enabled.

Syntax   igmp-switches-show

node-ip ip-address

The node IP address.

vnet vnet-name

Name of the vNET assigned to the IGMP static source.

bd bridge-domain name

The bridge domain name.

vlan vlan-id

The VLAN identifier.

port port-number

The port number.

Defaults   None

Access   CLI

History   

Version 2.3.3

Command introduced.

Version 2.4.1

The parameters group-ip, node-type, expires, and source deprecated. The parameters vnet and vlan added.

Version 5.1.1

The parameter bd added.

Usage   Displays information about IGMP switches.

Examples  To display IGMP switches, use the following syntax:

CLI (network-admin@switch) > igmp-switches-show

switch  node-ip vlan port

------- ------- ---- ----

spine-1 0.0.0.0 1    3    

spine-1 0.0.0.0 1    57   

spine-1 0.0.0.0 2    3    

spine-1 0.0.0.0 3    3

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south