port-phy-config-show
This command is used for displaying unreliable LOS configuration.
Syntax port-phy-config-show
|
port port-list |
The port list. |
|
phy-config los-unreliable |
Enable unreliable LOS configuration. |
|
phy-config_state disable|enable |
Enable or disable physical port configuration. |
Defaults None
Access Network administrator
History
|
Version 6.1.0 |
Command introduced. |
Usage This command is used to display unreliable LOS configuration.
Examples To display unreliable LOS configuration on port 49, use the following command:
CLI (network-admin@switch) > port-phy-config-show port 49
switch port phy-config phy-config_state
---------------- ---- -------------- ----------------
serpens-ptf-test 49 los-unreliable enable
Note: This command is available only on the following platforms:
Dell: S4148T-ON, S4148-ON, S4128F-ON, S4128T-ON, S4112F-ON, S4112T-ON, S5232F-ON, S5248F-ON, Z9264, S5224F-ON, S5212F-ON
Ericsson: NRU03, NRU-S0301
Edgecore(Freedom): AS7816-64X ( F9664-C), 7726-32X (F9432-C), 7326-56X (F9476-V), 5835-54X (F9460-X)