port-xcvr-breakout-ability-show

This command to display the available XCVR breakout modes.

Syntax   port-fec-mode-modify

port port-list

The port number or list of ports.

port(s) port-list

The list of logical breakout port(s).

bezel-port bezel-port-string

The associated bezel port.

vendor-name vendor-name-string

The transceiver vendor name.

part-number part-number-string

The transceiver part number.

breakout sys-default|400g-1x|100g-4x|100g-2x

The port breakout mode.

avail Yes|No

Specifies whether Breakout is available via NetVisor.

advert advert-string

The CMIS application descriptor record number.

app-record-hex app-record-hex-string

The Raw hex application record.

host-ifc host-ifc-string

The Host Interface.

media-type media-type-string

The media Type.

media-ifc media-ifc-string

The media Interface.

status status-string

The sys-default and current breakout flags.

Defaults   None

Access   CLI

History   

Version 7.0.1

Command introduced.

Usage   Use this command to display the available XCVR breakout modes.

Information  This command is applicable only on Z9432F-ON platform in NetVisor version 7.0.1.

Examples  To display an optical module with 2 app records on port 17, use the following command:

CLI (network-admin@switch) > port-xcvr-breakout-ability-show port 17

port(s) bezel-port vendor-name part-number breakout avail advert host-ifc   media-type status

------- ---------- ----------- ----------- -------- ----- ------ ---------- ---------- -----------

17      5          DELL EMC    TP2F0       400g-1x  Yes   app-01 400G-GAUI8 mmf        sys-default

17,19   5          DELL EMC    TP2F0       200g-2x  Yes   app-02 200G-GAUI4 mmf        current

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south