port-xcvr-memory-show
Use this command to display information about transceiver memory.
Syntax port-xcvr-memory-show
|
ports port-list |
The specified ports. |
|
pages pages-string |
The transceiver pages: default, seperate pages with comma. |
Defaults None
Access Network Administrator
History
|
Version 3.1.0 |
Command introduced. |
Usage Use this command to display information about transceivers memory.
Examples Use the following syntax to display port 21:
CLI (network-admin@switch) > port-xcvr-memory-show
port-xcvr-memory-show port 21 pages 0.1 format all
pages
--------------------------------------------------------------------------------
From Port 21, Base Port 21 port member: 21-24
Page 0x00 Base Port 21 Lower :
0x91 0x00 0x10 0x00 0xff 0x00 0xf0 0xff 0x00 0x01 0x55 0x55 0x55 0x55 0x00 0x00
0x00 0x00 0x00 0x00 0x55 0x55 0x22 0x42 0x00 0x00 0x7d 0x14 0x47 0x4a 0x27 0x10
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x56 0x22 0x56 0x22 0x56 0x22 0x56 0x22 0x56 0x22 0x56 0x22 0x56 0x22
0x56 0x22 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0f 0xea 0x10 0x3e 0x12 0x36
0x10 0xe6 0x00 0x00 0x00 0x00 0x0f 0xaa 0xaa 0xaa 0xaa 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0xff 0xff 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Page 0x00 Base Port 21 Upper :
0x91 0x0c 0x0c 0x80 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x05 0xff 0x02 0x02 0x00
0x00 0x00 0x00 0x40 0x4c 0x55 0x58 0x54 0x45 0x52 0x41 0x20 0x20 0x20 0x20 0x20
0x20 0x20 0x20 0x20 0x1f 0x00 0x25 0x63 0x4c 0x55 0x58 0x36 0x32 0x36 0x30 0x38
0x42 0x4f 0x45 0x20 0x20 0x20 0x20 0x20 0x42 0x20 0x66 0x58 0x0b 0xb8 0x00 0xb5
0x07 0x07 0xff 0xba 0x32 0x30 0x31 0x32 0x30 0x30 0x30 0x30 0x35 0x34 0x20 0x20
0x20 0x20 0x20 0x20 0x32 0x30 0x30 0x33 0x32 0x31 0x20 0x20 0x0c 0x08 0x68 0x59
0x45 0x52 0x49 0x00 0x52 0x44 0x48 0x31 0x30 0x33 0x30 0x33 0x30 0x31 0x2f 0x30
0x32 0x20 0x20 0x20 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0