service-heartbeat-modify
NetVisor OS generates a packet from the CPU to send to the receive port of an Inline Service, and the NetVisor vFlow configured for snooping is not port-specific, as NetVisor accepts the response from either the receive port or the transmit port. You configure the heartbeat as an additional parameter for a specific Inline Service.
Syntax service-heartbeat-modify
|
name name-string |
Specify a name for the Heartbeat Service. |
|
interval duration: #d#h#m#s |
Specify the interval between heartbeat packets. |
|
retry retry-number |
Specify the number of times to retry sending a packet. |
|
payload payload-string |
Specify the payload for the heartbeat packet. |
Defaults None
Access Network Administrator
History
|
Version 2.6.0 |
Command introduced. |
Usage Use this command to modify a Heartbeat Service configuration.
Examples To modify a Heartbeat Service, use the following syntax:
CLI (network-admin@switch) > service-heartbeat-modify name FW_probe retry 5