service-heartbeat-show
NetVisor OS generates a packet from the CPU to send to the receive port of an Inline Service, and the NetVisor vFlow configured for snooping is not port-specific, as NetVisor accepts the response from either the receive port or the transmit port. You configure the heartbeat as an additional parameter for a specific Inline Service.
Syntax service-heartbeat-show
|
name name-string |
Name for the Heartbeat Service. |
|
interval duration: #d#h#m#s |
The interval between heartbeat packets. |
|
retry retry-number |
The number of times to retry sending a packet. |
|
vlan vlan-id |
The VLAN ID. |
|
src-mac mac-address |
The source port MAC address. |
|
dst-mac mac-address |
The destination MAC address. |
|
type normal|pass-through |
The type of heartbeat response as normal or passthrough. A normal response indicates that the Inline Service sends the response. A passthrough response indicates that NetVisor sends the response, and returns it to the Inline Service. |
|
payload payload-string |
The payload for the heartbeat packet. |
Defaults None
Access Network Administrator
History
|
Version 2.6.0 |
Command introduced. |
Usage Use this command to display information about a Hearbeat Service configuration.
Examples To display information about a Hearbeat Service configuration, use the following syntax:
CLI (network-admin@switch) > service-heartbeat-show