switch-setup-show
This command is used to display basic setup parameters for a switch.
Syntax switch-setup-show
Defaults None.
Access
History
|
Version 1.2.1 |
Command introduced without parameters. |
Usage Each switch requires an initial setup before installing on the network. Use this command to display basic parameters for the local switch.
Examples To display basic parameters, use the following command:
CLI (network-admin@switch) > switch-setup-show
switch-name: switch-1
mgmt-ip: 10.14.24.76/23
mgmt-ip-assignment: static
mgmt-ip6: 2222::3/92
mgmt-ip6-assignment: static
mgmt-link-state: up
mgmt-link-speed: 1g
in-band-ip: 192.168.103.76/24
in-band-ip6: 5555::3/92
gateway-ip: 10.14.24.1
gateway-ip6: 2222::100
dns-ip: 172.16.1.4
dns-secondary-ip: 10.135.1.13
domain-name: pluribusnetworks.com
ntp-server: 0.ubuntu.pool.ntp.org
ntp-secondary-server: 1.ubuntu.pool.ntp.org
timezone: Etc/UTC
date: 2018-01-10,16:51:44
phone-home: no
hostid: 184551677
location-id: 2
analytics-store: default
enable-host-ports: yes
banner: