switch-status-show

This command is used to display the status of the switch.

Syntax   switch-status-show

start-time date/time: yyyy-mm-ddThh:mm:ss

Specify a time to start statistic collection.

end-time date/time: yyyy-mm-ddThh:mm:ss

Specify a time to end statistic collection.

duration duration: #d#h#m#s

Specify the duration of statistic collection.

interval duration: #d#h#m#s

Specify an interval between statistic collection.

since-start|
no-since-start

Display statistics collected since start-time.

older-than duration: #d#h#m#s

Display statistics older than the specified time.

within-last duration: #d#h#m#s

Display statistics within the last time.

name name-string

Displays the hardware name.

value value-number

Displays the hardware value.

units degrees-C|volts|rpm

Displays the hardware units.

state ok|fault|fatal

Displays the hardware state.

Defaults   None

Access   CLI

History   

Version 1.2.1

Command introduced.

Usage   Use this command to display the status of a switch.

Examples  To display the status, use the following command:

CLI (network-admin@switch) > switch-status-show

switch     name            value units     state   

---------- --------------- ----- --------- -----

pleiades25 Switch Temp     37    degrees-C ok    

pleiades25 CPU1 Temp       41    degrees-C ok    

pleiades25 CPU2 Temp       45    degrees-C ok    

pleiades25 System Temp     39    degrees-C ok    

pleiades25 Peripheral Temp 30    degrees-C ok    

pleiades25 PCH Temp        45    degrees-C ok    

pleiades25 switch-5.0v           volts     ok    

pleiades25 switch-2.5v           volts     ok    

pleiades25 switch-0.95v          volts     ok    

pleiades25 switch-1.8v           volts     ok    

pleiades25 switch-1.2v           volts     ok    

pleiades25 fan-1           7050  rpm       ok    

pleiades25 fan-2           8057  rpm       ok    

pleiades25 fan-3           8057  rpm       ok    

pleiades25 fan-4           7050  rpm       ok

Switch:                         netops-1

x86-system-temp[C]:             37

x86-peripheral-temp[C]:         27

x86-pch-temp[C]   :             43

x86-s-vtt:                      ok

x86-1p1v:                       ok

x86-1p5v:                       ok

x86-3p3v:                       ok

x86-3p3vsb:                     ok

x86-5p0v:                       ok

x86-5p0vsb:                     ok

x86-12p0v:                      ok

x86-vbat:                       ok

switch-temp[C]:                 45

switch-0p95v:                   ok

switch-1p8v:                    45

switch-t1p2v:                   fault

fan1-speed[RPM]:                3525

fan2-speed[RPM]:                3525

fan3-speed[RPM]:                3525

fan4-speed[RPM]:                3760

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south