vport-settings-modify
vPort information is collected, and stored on a disk on the switch at specific intervals. This command is used to modify the settings of vPort.
Syntax vport-settings-modify
|
Specify one or more of the following options: |
|
|
vport-disk-space vport-disk-space-number |
Specify the amount of disk space for vPorts. The default is 500M. |
|
stats-max-memory stats-max-memory-number |
Specify the maximum memory for collecting vPort information. The default memory is 50M. |
|
stats-log-enable|stats-log-disable |
Specify if you want to enable or disable logs for vPort statistics. Enabled by default. |
|
stats-log-interval duration: #d#h#m#s |
Specify the interval between logging events. The default is one minute. |
|
stats-log-disk-space disk-space-number |
Specify the amount of disk space for vPort logs. The default is 50M. |
|
system-stats-max-memory system-stats-max-memory-number |
Specify the maximum memory for system statistics |
|
system-stats-log-enable|system-stats-log-disable |
Specify if you want to enable or disable logging for the system. Enabled by default. |
|
system-stats-log-interval duration: #d#h#m#s |
Specify the interval between logging events. The default is one minute. |
|
system-stats-log-disk-space disk-space-number |
Specify the disk space for system statistics. The default is 50M. |
|
loop-prevent|no-loop-prevent |
Enable or disable loop prevent. |
|
retry-interval 15..3600 |
Specify the number of seconds before next update for entries with error. |
|
excess-mac-move-protection-enable|no-excess-mac-move- protection-enable |
Enable or disable excess MAC move protection. |
|
excess-mac-move-queue-protect|no-excess-mac-move-queue-protect |
Enable or disable excess MAC move queue protection. |
|
excess-ip-move-protection-enable|no-excess-ip-move-protection-enable |
Enable or disable excess IP move protection. |
|
excess-ip-move-queue-protect|no-excess-ip-move-queue-protect |
Enable or disable excess IP move queue protection. |
Defaults See individual parameters.
Access CLI
History
|
Version 2.2 |
Command introduced. |
|
Version 6.0.0 |
The parameters excess-mac-move-protection-enable|no-excess-mac-move-protection-enable, excess-mac-move-queue-protect|no-excess-mac-move-queue-protect,excess-ip-move-protection-enable|no-excess-ip-move-protection-enable, and excess-ip-move-queue-protect|no-excess-ip-move-queue-protect added. |
Usage Use the command to modify vPort settings to collect vPort information.
Examples To modify the vPort disk space from 500M to 1G, use the following syntax:
CLI (network-admin@switch) > vport-settings-modify vport-disk-space 1G