vport-show
This command is used to display information about virtual ports on a fabric. Virtual ports track switch information across nodes on the fabric.
Informational Note: NetVisor OS does not automatically populate the output fields for hypervisor, and VM. In future releases, NetVisor gathers this information using a multicast communication across the fabric.
Syntax vport-show
|
owner node name |
The owner name. |
|
mac mac-address |
The MAC address of the vPort. |
|
vnet vnet-name |
The vNET name. |
|
bd bridge-domain name |
Bridge Domain assigned to vPort. |
|
vlan vlan-id |
Displays a VLAN from 0 to 4095. |
|
inner-vlan 0..4095 |
Q-in-Q inner VLAN assigned to vPort. |
|
public-vlan 0..4095 |
The ID of the public VLAN. |
|
vxlan vxlan-id |
Displays a VXLAN from 0 to 16777215. |
|
ip ip-address |
DisplaysDisplays an IP address. |
|
num-ips num-ips-number |
The number of IP addresses for the vPort. |
|
config-intf config-intf-number |
The configuration interface number. |
|
intf intf-number |
Port that owns the vPort |
|
ports port-list |
The list of ports. |
|
state active|static|vrrp|tunnel|software|needs-peer-status|port-mac|hit|ageout-check|moving|loop-probe|local-tunnel|igmp-mac|user-flush|vxlan-loopback|router|update-peer-only|active-state-mismatch|peer-port-missing|peer-port-not-vlag| peer-port-not-orphaned|peer-port-not-cluster-link|sw-active|anycast|hsrp|invalid-vlan|owner-lost|cluster-link-down|vxlan-router|peer-force-resync|excess-mac-move-detected|excess-ip-move-detected|retry|evpn|evpn-wo-bgp|evpn-def-gw|evpn-delete|evpn-mac-move |
The vPort state. |
|
svc-name svc-name-string |
Name of the vCenter connection service. |
|
hostname hostname-string |
The hypervisor or switch host name. |
|
entity entity-string |
The VM or KVM device name. |
|
power none|powered-off|powered-on|standby|suspended|unknown |
The vPort entry status. |
|
cpus cpus-number |
The number of CPUs assigned to the VM. |
|
os os-string |
Displays an operating system, such as CentOS or Ubuntu, on the VM. |
|
portgroup portgroup-string |
The port group name associated with the VM MAC address. |
|
pg-vlans vlan-list |
The VLANs assigned to a port group. |
|
vswitch vswitch-string |
Name of the virtual switch associated with a NIC. |
|
vs-type none|host-vs|distributed-vs|unknown |
The type of virtual switch. |
|
vnic-type untagged|tagged|trunked|vm-mgmt|vm-kernel|vMotion|vSAN|FTL| rep|p-NFC|r-NFC|mgmt|unknown |
The type of vNIC associated with the VM or VM-Kernel. |
|
config none|owner|ip|port|hostname|entity|cpus|os |
The configuration type for the virtual switch. |
|
rem-switch node name |
Name of the remote switch. |
|
rem-intf rem-intf-number |
The remote interface number. |
|
rem-ports port-list |
The remote switch ports. |
|
peer-intf peer-intf-number |
The peer interface number. |
|
peer-state active|static|vrrp|tunnel|software|needs-peer-status|port-mac|hit|ageout-check|moving|loop-probe|local-tunnel|igmp-mac|user-flush|vxlan-loopback|router|update-peer-only|active-state-mismatch|peer-port-missing|peer-port-not-vlag| peer-port-not-orphaned|peer-port-not-cluster-link|sw-active|anycast|hsrp|invalid-vlan|owner-lost|cluster-link-down|vxlan-router|peer-force-resync|excess-mac-move-detected|excess-ip-move-detected|retry|evpn|evpn-wo-bgp|evpn-def-gw| evpn-delete|evpn-mac-move |
The state of the peer vPorts. |
|
peer-owner-state active|static|vrrp|tunnel|software|needs-peer-status|port-mac|hit|ageout-check|moving|loop-probe|local-tunnel|igmp-mac|user-flush|vxlan-loopback|router|update-peer-only|active-state-mismatch|peer-port-missing|peer-port-not-vlag|peer-port-not-orphaned| peer-port-not-cluster-link|sw-active|anycast|hsrp|invalid-vlan|owner-lost|cluster-link-down|vxlan-router|peer-force-resync|excess-mac-move-detected|excess-ip-move-detected|retry|evpn|evpn-wo-bgp|evpn-def-gw|evpn-delete|evpn-mac-move |
The state of the peer owner vPorts. |
|
status phy-up|up|disabled|hw-nat-loop|mirror-loop|mirror-to|PN-switch|PN-fabric|PN-other|PN-cluster|PN-internal|host| uplink|STP-BPDUs|LLDP|trunk|l3-port|remote-l3-port|dhcp|dhcpsvr|blocked|no-BPDU|LACP-PDUs|vlag-active|vlag-blocked|stp-edge-port|LACP-wait|LACP-fallback|adjacency-wait|adjacency-check|vlag-wait|multicast-router|host-disabled|loop|congested|vxlan-loopback|vlan-up|vle|vle-wait|phy-down|down|enabled|err-disabled|err-bpdu-guard|mac-violation|stp-bpdu-guard|stp-root-guard|defer-bringup-wait|rx-bw-threshold-exceeded|tx-bw-threshold-exceeded |
The vPort status. |
|
vtep-ip ip-address |
The VTEP IP address. |
|
tunnel tunnel-string |
The vPort tunnel. |
|
create-time date/time: yyyy-mm-ddTHH:mm:ss |
The vPort create time. |
|
last-seen date/time: yyyy-mm-ddTHH:mm:ss |
The last time the vPorts was seen. |
|
last-seen-since date/time: yyyy-mm-ddTHH:mm:ss |
The last time the vPorts was seen since a specified time. |
|
vxlan-lru date/time: yyyy-mm-ddTHH:mm:ss |
The time, and date of the VXLAN LRU. |
|
hit hit-number |
The number of hits. |
|
migrate migrate-number |
The number of times the entry migrated. |
|
drops drops-number |
The number of dropped packets. |
|
hw-index hw-index-number |
The hardware index number. |
|
rt-if rt-if-string |
The router interface. |
|
hw-flags invalid-vlan|invalid-port |
The hardware flags. |
|
mc-index mc-index-number |
L2 multicast group index in hardware. |
Defaults None
Access CLI
History
|
Version 2.2 |
Command introduced. |
|
Version 2.2.6 |
The parameters stp-edge-port|LACP-wait| adjacency-wait|adjacency-check|vlag-wait|multicast-router added. |
|
Version 2.3 |
The parameters num-ips, and vm-status added. |
|
Version 2.4.1 |
The parameter public-vlan added. |
|
Version 2.6.2 |
The parameter svc-name, power, entity, portgroup, pg-vlans, vswitch, vs-type, and vnic-type added. The parameters hypervisor, vm-id, vm-name, vm-flavor, vm-status, memory, deprecated. |
|
Version 3.0.0 |
The options, anycast, invalid-vlan, and owner-lost added to state, peer-state, and peer-owner-state. |
|
Version 3.1.0 |
The parameters vtep-ip, and ND added. |
|
Version 6.1.0 |
The options evpn, evpn-wo-bgp, evpn-def-gw, evpn-delete added to state, peer-state, and peer-owner-state. |
Usage Use this command to display vPort information on the switch. NetVisor mirrors vPorts across the fabric so every switch knows about all the L2 entries on the fabric. You may find this useful for troubleshooting connections across the fabric.
Examples To display vPorts, use the following syntax:
CLI (network-admin@switch) > vport-show status format all
owner vlan public-vlan ip num-ips intf ports state rem-switch rem-intf rem-ports status create-time last-seen hit migrate
------ ---- ----------- ------------------------ ------- ---- ----- -------- ---------- -------- --------- ------------------ -------------- -------------- --- -------
switch 1 1 274 45,49 active 0 07-05,13:32:29 07-07,14:50:27 2 36
switch 1 1 274 45,49 07-05,14:10:24 07-07,23:33:13 63
switch 1 1 port-mac leo-ext-21 18 18 PN-switch,PN-other 07-05,13:32:29 00:11:19 1
switch 1 1 port-mac leo-ext-21 45 45 PN-switch,PN-other 07-05,13:32:29 00:11:19 1
switch 1 1 192.22.1.240 12 12 active host 07-05,13:46:03 07-07,14:54:21 1
switch 1 1 69 69 active PN-internal 07-05,13:40:32 00:10:20 54
switch 1 1 port-mac leo-ext-23 22 22 PN-switch,PN-other 07-05,13:32:29 00:11:11 1
switch 1 1 fe80::660e:94ff:fec0:53b 2 274 45,49 active host 07-05,13:32:29 00:10:32 1 22
switch 1 1 port-mac leo-ext-21 17 17 PN-switch,PN-other 07-05,13:32:29 00:11:19 1
switch 1 1 port-mac leo-ext-21 49 49 PN-switch,PN-other 07-05,13:32:29 00:11:19 1
switch 1 1 192.22.1.230 274 45,49 active 0 host 07-05,13:44:54 07-07,14:54:34 1
switch 1 1 274 45,49 active 0 07-05,13:32:29 07-07,14:50:23 1 20
switch 1 1 port-mac leo-ext-23 21 21 PN-switch,PN-other 07-05,13:32:29 00:11:11 1
switch 1 1 port-mac leo-ext-23 65 65 PN-switch,PN-other 07-05,13:32:30 00:11:11 1
switch 1 1 port-mac leo-ext-23 61 61 PN-switch,PN-other 07-05,13:32:29 00:11:11 1
switch 1 1 igmp-mac PN-internal 07-05,13:32:24 00:11:03
switch 1 1 69 69 active 0 PN-internal 07-05,13:32:29 07-07,14:49:23 1 4
switch 1 1 202.22.1.240 274 45,49 active host 07-05,13:44:27 07-07,14:54:01 1
switch 1 1 port-mac leo-ext-21 27 27 PN-switch,PN-other 07-05,13:32:29 00:11:19 1
switch 1 1 274 45,49 active 0 07-05,13:32:29 07-07,14:50:03 1 34
switch 1 1 172.22.1.230 274 45,49 active 0 host 07-05,13:44:54 07-07,14:54:34 1
switch 1 1 PN-internal 07-05,13:32:38 07-05,13:32:38 1