vrouter-ping
This command is used to ping from a vRouter to a host IP address on the network.
Syntax vrouter-ping
|
vrouter-name name-string |
Specify the name of the vRouter used to ping the host. |
|
host-ip ip-address |
Specify the host IP address. |
|
Specify between 0, and 3 of the following options: |
|
|
count count-number |
Specify the number of packets to transmit to the host. |
|
fragment|no-fragment |
Specify if you want to toggle fragments. |
|
interval interval-number |
Specify the interval between successive transmissions. |
|
outgoing-interface outgoing-interface-string |
Specify the outgoing interface to ping. |
Defaults None
Access CLI
History
|
Version 2.3.1 |
Command introduced. |
|
Version 2.6.2 |
The parameter outgoing-interface added. |
Usage Use this command to ping a host on the network from a vRouter.
Examples To ping the host, 192.168.11.134, from vRouter, myvrouter, use the following syntax:
CLI (network-admin@switch) > vrouter-ping vrouter-name myvrouter host-ip 192.168.11.134