vrouter-prefix-list-add
Prefix lists are used by BGP, and OSPF to filter route advertisements.
Syntax vrouter-prefix-list-add
|
vrouter-name name-string |
Specify the name of the vRouter. |
|
Specify the following prefix-list arguments: |
|
|
name name-string |
Specify a name for the prefix list. |
|
action permit|deny |
Specify the type of action, permit or deny. |
|
prefix ip-address |
Specify the IP address used as the prefix. |
|
netmask netmask |
Specify the netmask of the IP address. |
|
Specify any of the following options: |
|
|
seq number |
Specify a sequence number. This is a number between 1, and 4294967295. |
|
min-prefix-len number |
Specify the minimum prefix length. This is a value between 0, and 32. |
|
max-prefix-len number |
Specify the maximum prefix length. This is a value between 0, and 32. |
Defaults None
Access CLI
History
|
Version 2.2.3 |
Command introduced. |
|
Version 2.2.4 |
The parameter any added. |
|
Version 2.5 |
The parameter anyv6 added. |
|
Version 5.1.0 |
The parameters any and anyv6 deprecated. |
Usage Use this command to specify prefix lists used with BGP, and OSPF.
Examples To configure a prefix list, no-ads, with the action, deny, prefix, 10.9.11.13/32, and minimum prefix length 15, use the following syntax:
CLI (network-admin@switch) > vrouter-prefix-list-add vrouter-name vrouter-ospf name no-ads action deny prefix 10.9.11.13 netmask 255.255.255.0 min-prefix-len 15