Virtual Link Static Bidirectional Association
Virtual Link Extension (vLE) static bidirectional association is between a physical port or trunk and a VXLAN tunnel for a selected VNID. Every virtual link extension is defined using a VLAN or VXLAN VNID and adding physical ports or trunk and tunnels to this VLAN or VXLAN VNID. One endpoint of virtual link extension must be a physical port or trunk and other end point must be a virtual tunnel end point (VTEP). A VTEP can carry multiple vLE VLANs or VXLANs.
Netvisor ONE creates vLE VLANs using a special VXLAN mode called “transparent” which prevents flooding and learning on vLE VLANs in the switch. Netvisor ONE sends packets directly between a physical port or trunk and the vLE part of vLE regardless of traffic types. There is no BPDU processing for vLE VLAN.
Enhancements to vLE VLANs now provide the capability of adding and removing ports, as well as assigning or modifying trunk ports. Note that when you delete a trunk carrying a vLE VLAN, Netvisor ONE removes the vLE VLAN from the trunk members to avoid any hardware inconsistencies.
Virtual Link Static Bidirectional Command
Use the vlan-create vxlan-mode standard|transparent command to configure this feature.