Was this helpful?
Setting the Date and Time
To set the date and time on the switch, modify the switch configuration using the switch-setup-modify command. To change the date and time to December 25, 2017, 12:00:00, use the following syntax:
CLI (network-admin@Leaf1)>switch-setup-modify date 2017-12-25T12:00:00
Display the configured setting using the switch-setup-show command:
CLI (network-admin@Leaf1)>switch-setup-show
switch-name: switch
mgmt-ip: 10.9.11.211/16
mgmt-ip6: fe80::3617:ebff:fef6:e2c4/64
mgmt-link-state: up
mgmt-link-speed: 1g
in-band-ip: 10.9.11.213/16
gateway-ip: 10.14.2.1
gateway-ip6: 2001:1000:1111:2222:3333:abcd:1000:2
dns-ip: 10.20.4.1
dns-secondary-ip: 10.20.40.1
domain-name: pluribusnetworks.com
ntp-server: 0.ubuntu.pool.ntp.org
timezone: America/Los_Angeles
date: 2017-12-25,01:06:47
hostid: 184551447
location-id: 1
analytics-store: default
enable-host-ports: yes
banner:
 
The analytics-store parameter refers to the storage location for analytics which in this case is the hard drive on the switch. Netvisor ONE does not support external hard drives.