Configuring IPFIX
To configure IPFIX from the CLI, you must have a host IP address as the destination for the IPFIX collector. Netvisor ONE uses port 9090 by default, and the default transport protocol type is TCP.
CLI network-admin@switch > ipfix-collector-create name ipfix-host1 port 9090 transport-protocol tcp dscp 3
To enable the IPFIX service, use the command, ipfix-service-modify enable. You can also set the collection interval using this command. To set the collection interval to one hour, use the following syntax:
CLI network-admin@switch > ipfix-service-modify enable export-interval 0d1h0m0s