SFLOW - sFlow Collector
Security/Monitoring sFlow Collector
Selecting Overview → Manage → Security/Monitoring → sFlow Collector displays the sFlow Collector dashboard.
When dashboard initially loads you are presented with the following if no sFlow Collector exists:
Manage Security/Monitoring sFlow Collector Dashboard
There are two scenarios when using sFlow. The first is using UNUM as a sFlow collector from a non-Pluribus Networks device, i.e. a third-party device.
The second scenario is using UNUM as a sFlow collector from a Pluribus Networks device.
In the case where UNUM is used as a collector from a third-party device you must configure that device to send the data to the UNUM instance using the UNUM IP address and port number 2055.
In the case where UNUM is used with a Pluribus Networks device you need to create an sFlow Agent as described in this document and create a sFlow Collector to point to the UNUM instance using the UNUM IP address and port number 2055.
In either case the first time that you enable the sFlow Collector, you must add a valid sFlow Collector and Exporter license.
Use the following steps to add the license and enable sFlow.
- After configuring sFlow on the switch, log into UNUM and click Manage → Manage Collector.
- Locate the sFlow Collector and disable if the sFlow Collector if it is running.
- Use Edit by selecting theCog icon for the applicable sFlow Collector and add the sFlow Collector license key and Exporter license key.
- Click Update to continue.
Manage Collector sFlow Collector License Keys
Once validated and added, the license keys will appear in the Edit sFlow Collector screen along with a [valid license] status message. You continue to configure the sFlow Collector using the link provided in the window.
Manage Collector sFlow Collector Valid License Keys
Enable the sFlow Collector and verify results on the Manage Collector dashboard.
To create a sFlow Collector click Create a sFlow Collector. Enter the required parameters which include:
- name – sFlow name
- scope – local or fabric
- collector-port – sFlow collector port
- Collector-ip – sFlow collector IP address
Manage Collector sFlow Collector Create Collector
Click Save to continue or Cancel to return to the previous screen without saving any changes.
When the sFlow Collector is successfully added the system will return you to the sFlow Collector dashboard.
The dashboard displays a list of existing sFlow entries by name. Additional parameters include: scope, collector-port and collector-ip.
You sort the list of entries in the dashboard using the up / down arrows above each of the columns to sort the information as needed.
Manage Collector sFlow Collector Added to Dashboard
Fabric sFlow Port View
Select the desired Fabric from the left side navigation bar and the dashboard updates showing all sFlow Collector entries from all switches within the Fabric.
The dashboard displays a list of existing sFlow Collector entries by Switch name. When scope is set to Fabric the Switch name is not displayed.
Additional parameters include: name, scope, collector-port and collector-ip.
Manage Collector sFlow Collector Fabric Dashboard
To obtain detailed information about a sFlow Collector, select an entry in the dashboard.
A Details pane opens displaying the configuration information of the sFlow Collector.
Scroll through the list, as needed, and click X to return to the dashboard.
Manage Security/Monitoring sFlow Manage Collector sFlow Collector Details
To delete a sFlow Collector use Delete by selecting the Cog icon. A confirmation message requires an acknowledgment to continue deletion.
Manage Security/Monitoring sFlow Manage Collector sFlow Collector Delete Collector