E Commands

err-disable-clear-counters

Physical ports are automatically disabled by Netvisor due to certain violations. For example, if a port receives BPDU messages from an edge port, Netvisor disables the port because receiving BPDUs on a edge port is a security violation. However, there is no way to indicate that the port is shut down because of a violation and not because of physical link issues.

Syntax   err-disable-clear-counters

bpduguard|no-bpduguard

Specify if you want BPDU guard enabled.

macsecurity|no-macsecurity

Specify if you want MAC recovery enabled.

recovery-timer duration: #d#h#m#s

Specify the recovery time value.

Defaults   None

Access   Network Administrator

History   Command introduced in Version 2.6.0.

Usage   Use this command to reset port error counters.

Examples  To clear port error counters, use the following syntax:

CLI network-admin@switch > err-disable-clear-counters

err-disable-modify

Physical ports are automatically disabled by Netvisor due to certain violations. For example, if a port receives BPDU messages from an edge port, Netvisor disables the port because receiving BPDUs on a edge port is a security violation. However, there is no way to indicate that the port is shut down because of a violation and not because of physical link issues.

Syntax   err-disable-modify

bpduguard|no-bpduguard

Specify if you want BPDU guard enabled.

macsecurity|no-macsecurity

Specify if you want MAC recovery enabled.

recovery-timer duration: #d#h#m#s

Specify the recovery time value.

Defaults   None

Access   Network Administrator

History   Command introduced in Version 2.6.0.

Usage   Use this command to modify port error counters.

Examples  To clear port error counters, use the following syntax:

CLI network-admin@switch > err-disable-modify

err-disable-counters-clear

Physical ports are automatically disabled by Netvisor due to certain violations. For example, if a port receives BPDU messages from an edge port, Netvisor disables the port because receiving BPDUs on a edge port is a security violation. However, there is no way to indicate that the port is shut down because of a violation and not because of physical link issues.

Syntax   err-disable-counters-clear


bpduguard|no-bpduguard

Specify if you want to clear BPDU guard counters.

macsecurity|no-macsecurity

Specify if you want to clear MAC recovery counters.

recovery-timer duration: #d#h#m#s

Specify the recovery time value.

Defaults   None

Access   Network Administrator

History   Command introduced in Version 2.6.0.

Usage   Use this command to reset port error counters.

Examples  To clear port error counters, use the following syntax:

CLI network-admin@switch > err-disable-counters-clear

eula-show

This command is used to display the End User License Agreement (EULA).

Syntax   eula-show

Defaults   None

Access   Network Administrator

History   Command introduced in Version 2.6.0.

Usage   Use this command to display the End User License Agreement (EULA).

Examples  To display End User License Agreement (EULA), use the following syntax:

CLI network-admin@switch > eula-show

exit

This command allows you to exit the CLI.

Defaults   None

Access   CLI.

Usage   Use this command to exit the CLI.