Glossary		Print Page		Document Feedback		Support & Services		Pluribus Networks		Pluribus Blog		LinkedIn		Facebook		Twitter

Configuring Switch Ports

This section contains information about the configuration and management of switch ports.

Introduction Displaying Port Information Displaying Port Statistics Configuring Port Speed	Configuring Static Pre-Emphasis (Signal Integrity) Port Settings Receive Path Equalization on NRU03 and NRU-S0301 Platforms
Configuring Port Storm Control Configuring 10/100M Override Using Bel-Fuse SFP-1GBT-05 on F9372-X Platforms	Configuring Link Scan Mode Configuring Maintenance Mode Configuring Forced Port Link-up
Configuring Fabric and vRouter Communication via KNET	Transceiver OIR Support Enabling Jumbo Frame Support
Using Port Buffering Configuring Queues 8 and 9 for Control Traffic	Configuring Uplink Groups Configuring Port Bandwidth Monitoring
Configuring Port Rate Limit	Configuration Using Port Description instead of Port Number
Configuring Minimum and Maximum Bandwidth on Ports	Disablement of Front-Panel Ports During nvOSd Failure Sending Alarm Notification About Management Ports
Configuring CoS Queue Weights Displaying and Configuring Port Queue Statistics Configuring Forward Error Correction	Reclaiming of Inactive vPort Entries from Crossing Threshold Managing Excessive Port Link Flaps Configuring Remote Loopback on NRU02