Pluribus UNUM 6.3.1

Manager Layer 3 Configuration

There are features and functions used in UNUM Manager and UNUM Analytics that are common throughout the user interface (UI). Please refer to the Common Functions section for more information on the use of these functions and features.

UNUM Manager provides for the set up and configuration of Layer 3 settings for switches. You need to select a switch.

For more details please refer to the nvOS and Netvisor ONE Configuration Guides at www.pluribusnetworks.com/support/technical-documentation.

Manager Layer 3 Configuration

Selecting Manager → Layer 3 displays all Layer 3 functions within UNUM. These include:

•vRouter – Virtual Router

▪Manage vRouter

▪vRouter Interfaces

▪Interface Config

▪vRouter Interface IP

▪Routing Table

▪Forwarding Table

▪Host Routes

▪vRouter VRF

•OSPF – Open Shortest Path First

▪Manage OSPF

▪OSPF Neighbors

•BGP – Border Gateway Protocol

▪Manage BGP

▪BGP Neighbors

▪BGP Neighbor Failure

▪BGP Networks

•VXLAN – Virtual Extensible Local Area Network

▪Manage Tunnel

▪Tunnel VXLAN

▪Manage VTEP

▪VTEP VXLAN

▪VTEP Auto-VXLAN

•STATIC ROUTING – Static Routing

▪Manage Routing

•L3 Overlay – Layer 3 OVERLAY Functions

▪Distributed VRF

▪Manage Subnet

▪Manage Anycast

▪Manage vSG

▪vSG Network

▪vSG VRF

▪Manage VRF Route

•EVPN – Ethernet VPN

▪EVPN ARP Cache

▪EVPN BGP Neighbor Summary

▪EVPN BGP Routes

▪EVPN BGP VNI

▪EVPN Duplicate MAC

▪EVPN VNI MAC

▪EVPN Node